trinityamps.com

Steve .. thanks for the file .. The OT hasn't arrived yet, however it should be here any day now .. it'll be going in my amp as soon as it arrives I'll let you know how it works out ..

REGARDS

Barry M

_________________
Barry M

HP color print (I've got a 24" machine at work), then laminated.

After a while, I may have better ones made, but for now I just want the amp to look "finished"

P.

I've made faceplates for prototype exactly the same way. Designed in Visio. then you just need a printer capable of large sheets then take it over to Staples & get it laminated. Cut out the holes.
My first Lightning was done that way. Cost me, like $5.

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps

S2, what version of CoralDraw doyou use? 12? I thought 11 was the latest. anyway,

I know this is off topic, but may I ask if you have the faceplate in cdr format for the 18watter TMB?

I didn't see it on 18watt.com download section. maybe I just missed it.

bob

S2, what version of CoralDraw doyou use? 12? I thought 11 was the latest. anyway,

I know this is off topic, but may I ask if you have the faceplate in cdr format for the 18watter TMB?

I didn't see it on 18watt.com download section. maybe I just missed it.

bob

I have version 12, but I saved in it v11 for those who need it. I don't happen to have the file for a true TMB, but I do have it for my own non MV design. It wouldn't be difficult to modify to make it a Richie TMB or a trem version.

Go here:

http://home.comcast.net/~stvnscott/18_W ... _Final.cdr

_________________
--s2
www.s2amps.com
www.category5amps.com

Thanks for posting the plates.. I'm so close, now if I could just figure out the rotation of the #s for the volume..

ok, I give up.. does anyone know how to do this? It's killing me!!@#!@# Hell I'd even look in the help file if I knew what it's called that I'm trying to do

What are you trying to do exactly? Do you want numbers 0-10? I don't know the right way to do it, so I kinda faked it by just making a circle and using individual text boxes for each number. I just placed them around the circle until I was happy then erased the circle. The only thing you have to careful about is the rotation of the pot. Alphas are 300 degrees, so you have to simulate that.

_________________
--s2
www.s2amps.com
www.category5amps.com

Yeah I'm trying to get 1-13 on there. I believe there's a function in Corel that will allow you to kind of do what you did, but more automatic. Maybe I'm wrong , it's been known to happen! I'll just space it out and see if I can get it right. THANKS for the response

Well, you can put the numbers along a 300 degree curve and use some function to cut them off the curve. I did it that way once, but couldn't figure it out again and needed to place the order ASAP, so I went to the faking it method.

_________________
--s2
www.s2amps.com
www.category5amps.com

I figured it out.. it's the rotation transformation tool.
thanks

I figured it out.. it's the rotation transformation tool.
thanks

btw- I think I'm going to use 30 watt iron and put in two extra els -