trinityamps.com

Hi all,

On the TC-15 wiring diagram the EF86 socket has a wire from ground to pin 7, with a jumper to pin 2. My question is this: can the ground wire come from pin 2? It would seem not to make a difference because of the jumper, but I want to be sure.

Thanks

You would still have to ground pin 7!
Hmm, as long as you stick with the schematic and ground pin 7, I don't see a problem (coco? )I don't see why you would want to change? The wire would be longer doing this (coco?) It makes more sense to stick with the original plan

It makes no difference - other than lead dress. I ran the ground wire to pin 2 on my build because the tube sockets I used were oriented differently than the ones used by Trinity. Just make sure the jumper from pin 2 to 7 is still there.

_________________
Deric®