So, I got my kit from Stephen on Wednesday, spent most of Wed. and today building it. Finished about 4 PM today, fired it up and it works first try. Wires are everywhere as you can see from the pictures, but it still sounds really, really good and is quiet.
Highly recommended as a first build, I had very few problems, my only issue was solved here on the forum (Thanks!)
I had some 16uF/475V sprague atom caps that I crammed in and I used sprague 25uF/25V's as well.
You'll also notice that the section of shielded wire is not there (wasn't in the kit, but Stephen has already sent me a piece) I'll put that in when I get it.