trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Sat Apr 05, 2025 12:09 pm

View unanswered posts | View active topics


Board index » On Stage » Tramp

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 7 of 7
  [ 132 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7
  Previous topic | Next topic 
Author Message
J.R.
PostPosted: Fri Dec 16, 2011 3:48 pm 
Offline
Novice
Novice

Joined: Mon May 16, 2011 3:21 pm
Posts: 74
alright, after looking at my amp I've figured out what I need to do to wire it according to the layout Stephen posted it. Its easier just to reverse the sides that the connections are on. that way I don't have to move the jumper wire. so the .01uf cap, the 220k resistor and pin 6 will be connected on the left. the carbon comp resistor, the jumper, and pin 6 will be on the right.

As i was making the moves something strange happened and the bottom/side of the cap with he lead attached just fell out. never seen that happen before.. :shock: probably too much heat/movement i guess. Anyway... could someone provide me with a link with a matching cap? I usually use mouser but their stock is so large I'm never sure that what I'm getting is the right thing.


Thanks guys. Happy holidays :)
Top
 Profile  
 
Stoo
PostPosted: Fri Dec 16, 2011 4:09 pm 
Offline
Experienced
Experienced
User avatar

Joined: Sat Jul 22, 2006 2:59 pm
Posts: 480
Location: Vancouver B.C. Canada
NO NO NO!!! :shock: :shock: The 220k, the .01 MUST go to pin 1!!!!! The 220K that is connected to the jumper under the board will go to pin 6!!.. :!: :!: :!: :!: :!: :!: :!: :?: :?: :?: :?: :?: :shock: :shock: :shock: :shock:
Top
 Profile  
 
J.R.
PostPosted: Fri Dec 16, 2011 4:18 pm 
Offline
Novice
Novice

Joined: Mon May 16, 2011 3:21 pm
Posts: 74
you're right. pin 6 to the jumper. my mistake :oops: that part is correct on my amp, i just mis-typed.
Top
 Profile  
 
Stoo
PostPosted: Fri Dec 16, 2011 4:23 pm 
Offline
Experienced
Experienced
User avatar

Joined: Sat Jul 22, 2006 2:59 pm
Posts: 480
Location: Vancouver B.C. Canada
Another thing. The "under board jumper" must not connect to the 220k/.01uf turret no-way no-how!
You see if you wired all the components on the top of the board correctly according to the layout diagram AND you put the jumper(under the board) to the right hand turret...your screwed. You'll have to rewire the turrets so that the top end of that .01 goes to the turret that DOES NOT HAVE THE JUMPER!!! or rewire the jumper properly which I'd do!


Last edited by Stoo on Fri Dec 16, 2011 4:28 pm, edited 1 time in total.

Top
 Profile  
 
J.R.
PostPosted: Fri Dec 16, 2011 4:25 pm 
Offline
Novice
Novice

Joined: Mon May 16, 2011 3:21 pm
Posts: 74
right. the jumper is only connected to the carbon comp resistor and pin 6.

the 220k, .01uf cap and pin 1 are on the other turret.

Guess I'm kinda stuck until i get another cap. :?
Top
 Profile  
 
Stoo
PostPosted: Fri Dec 16, 2011 4:42 pm 
Offline
Experienced
Experienced
User avatar

Joined: Sat Jul 22, 2006 2:59 pm
Posts: 480
Location: Vancouver B.C. Canada
I'm sure Stephen will send you one or I will ( if I have one,,,I'll check when I get home later) I'll look at mouser for ya.
Top
 Profile  
 
J.R.
PostPosted: Fri Dec 16, 2011 5:27 pm 
Offline
Novice
Novice

Joined: Mon May 16, 2011 3:21 pm
Posts: 74
That would be greatly appreciated. I took a look at the cap I have and mouser and I think these are a match?

http://www.mouser.com/ProductDetail/Cor ... jHUP6gc%3d

630V
10% tolerance.
.01uf

there are so many options. :lol:
Top
 Profile  
 
Stoo
PostPosted: Sat Dec 17, 2011 1:19 pm 
Offline
Experienced
Experienced
User avatar

Joined: Sat Jul 22, 2006 2:59 pm
Posts: 480
Location: Vancouver B.C. Canada
Ya those will work. I have a .01 Sozo I can send you. But it might be qiucker from Mouser. I'm on the west coast of Canada. Let me know.
Stew
Top
 Profile  
 
J.R.
PostPosted: Fri Dec 23, 2011 10:39 am 
Offline
Novice
Novice

Joined: Mon May 16, 2011 3:21 pm
Posts: 74
oops, thought I replied already. I ordered the ones from Mouser. They should be arriving today, i'll get them installed and check back. thanks for the offer Stu.
Top
 Profile  
 
J.R.
PostPosted: Sat Dec 24, 2011 4:00 pm 
Offline
Novice
Novice

Joined: Mon May 16, 2011 3:21 pm
Posts: 74
the new part and layout did the trick. the amp works beautifully. It sounds great so far :thumbsup:
Top
 Profile  
 
Stoo
PostPosted: Sat Dec 24, 2011 6:50 pm 
Offline
Experienced
Experienced
User avatar

Joined: Sat Jul 22, 2006 2:59 pm
Posts: 480
Location: Vancouver B.C. Canada
J.R. wrote:
the new part and layout did the trick. the amp works beautifully. It sounds great so far :thumbsup:


:D :D Took a while but you did it!! You probably know the inside of you amp better that most 8) !
Any ways... congrats and Merry Christmas.
Top
 Profile  
 
J.R.
PostPosted: Sat Dec 24, 2011 8:24 pm 
Offline
Novice
Novice

Joined: Mon May 16, 2011 3:21 pm
Posts: 74
Stoo wrote:
J.R. wrote:
the new part and layout did the trick. the amp works beautifully. It sounds great so far :thumbsup:


:D :D Took a while but you did it!! You probably know the inside of you amp better that most 8) !
Any ways... congrats and Merry Christmas.


yeah, it was a great learning experience. thanks for all of your help along the way stu.

merry Christmas :)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 7 of 7
  [ 132 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7

Board index » On Stage » Tramp

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group