trinityamps.com

Ok guys, you have been helpful with my other projects so I have a new one to hit you with. I built a Fender 5C3 clone from the Filmosound chassis for a friend of mine.It sounds pretty cool with the 6SL7 preamp tubes and is really raunchy! The chassis is really tiny and does not really suit a 4 input setup.Currently it has 2 inputs and 2 volumes & 1 tone. I would like to have it with a single input and 2 volumes & 1 tone and a 3 way switch to select either input or both together for that jumpered toneI tied a 3 way guitar switch from a les paul but when one channel was not engaged it would hum like crazy!. Does anyone have a layout or schematic for this? It could be a 5E3 circuit that I could adapt, or some other way to do it. Whattya got? I looked all over the web and couldn't really find a clear answer to this question.