trinityamps.com

My 18 sounds awsome! except it sounds like my tubes are shaking or viberating and is amplified through my speaker. it does it on all inputs I can tell you this.

My sozo caps are oriented different directions on the board

The picture I provided the black wires are the insulated wires from my inputs and my gain pot.

My pots are pointing downwards which mean i had to kind of wire the pots backwards

I can tell when i poke around with a chopstick the preamp tubes make the most sound and when i tap wires the wires going to the board from the tubes make the most sound and None of the wire from the transformers make any noise.

<a><img></a>

_________________
Luke

_________________
Luke

sounds most likely you have bad tubes. If you have additional tubes try switching out. Maybe someone else is faster, I'll look but I'm sure there 's a thread for this around here
Also, a straight on shot of your amp instead of a side shot would help alot

How goes the troubleshooting? Does the problem persist or have you sorted it out?

_________________
Cheers,
Steve

Really sounds like Microphonic tubes. Swap V3 with V1 & see if it helps. You need to find a good solid tube for V1 & V2

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps