trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Fri Nov 22, 2024 9:46 pm

View unanswered posts | View active topics


Board index » Back Stage » Dressing Room

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
goindeaf
 Post subject: Amp Chassis Building
PostPosted: Wed Nov 27, 2013 5:47 pm 
Offline
Friend
Friend

Joined: Sat Oct 30, 2010 11:50 am
Posts: 20
Hi, I need some advice on how to drill holes for tube sockets in an aluminum chassis. The holes need to be 1 3/16" and I don't have a step drill that big. Would a holesaw be the best tool?

Thanks, Dave.
Top
 Profile  
 
The Ballzz
 Post subject: Re: Amp Chassis Building
PostPosted: Thu Nov 28, 2013 12:32 am 
Offline
Friend
Friend

Joined: Sat Sep 21, 2013 10:45 pm
Posts: 43
Location: Las Vegas, NV
goindeaf, ME TOO, :rol
Hole saw would be okay, best if in a drill press at proper speed.
HTH,
Gene
Top
 Profile  
 
coco
 Post subject: Re: Amp Chassis Building
PostPosted: Thu Nov 28, 2013 12:10 pm 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
Go easy on the hole saw & it should work. If you can, use some cutting oil or lubricant to help. A punch that size can run around $50, but you could get one from Home Depot or similar place.

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps
Top
 Profile  
 
goindeaf
 Post subject: Re: Amp Chassis Building
PostPosted: Thu Nov 28, 2013 12:43 pm 
Offline
Friend
Friend

Joined: Sat Oct 30, 2010 11:50 am
Posts: 20
Thanks guys, I'll give the holesaw a try.

Dave.
Top
 Profile  
 
shinewink
 Post subject: Re: Amp Chassis Building
PostPosted: Fri Dec 02, 2022 10:32 am 
Offline

Joined: Fri Dec 02, 2022 10:21 am
Posts: 6
goindeaf wrote:
Thanks guys, I'll give the holesaw a try. foodle

Dave.

I use cutting oil to help with my sawing problem very well. Have you tried yet?
Top
 Profile  
 
BaileyDaugherty
 Post subject: Re: Amp Chassis Building
PostPosted: Thu Nov 02, 2023 7:21 am 
Offline
Friend
Friend

Joined: Mon Dec 05, 2022 5:03 am
Posts: 13
If you're careful with the hole saw, you should be fine. Use a lubricant or cutting oil to make things easier. You may find a suitable punch for the job for roughly $50 at Home Depot or a similar store. wordle today
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Back Stage » Dressing Room

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 28 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group