trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Fri Oct 11, 2024 4:19 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: My Trifly build!
PostPosted: Tue Apr 05, 2016 6:25 pm 
Offline

Joined: Sun Apr 03, 2016 1:47 am
Posts: 1
Hi Everyone,

New to the forum, greetings!

Got my hands on a Trifly kit last week and finished on Sunday, just wanted to share my experience!

Overall impression: What a great little amp! Came well packaged, well documented, is very peddle-friendly and surprisingly loud (I thought) considering the low wattage. I have a 12AU7 on order to see how that affects the overall volume, will be experimenting with some lower mu preamp tubes as well (my future goal is to get as high-gain and low-volume as possible).

The build was straightforward with great instructions. There are effects pedals more complicated to assemble (but likely not as dangerous :D ). Included is lots of extra info on how tubes work and how the different parts of the circuit affect the sound (will be trying out the switchable pre-amp gain mod for sure!)

Made a few errors along the way, namely the jumper layout on the reverse of the circuit board ('correct' layout in the pictures further down), as well as having some long component leads sticking out the bottom that were arcing with the tube sockets (sacrifices were made to the fuse-lord).

All-in-all sounds really nice for such a small package; very little hiss even at full volume despite my imperfect soldering and inattention to cable routing. Tubes start to break up with the volume around 11 o'clock and sound really good to me at about 2.

Looking forward to trying her out in a live situation and through some different cabinets, so far I've only used the following signal chain:
Les Paul Special (P-90) -> Trifly -> THD Hotplate (sigh urban environments) -> 4x12 (Celestion g12t-75).


Attachments:
File comment: Finished!
IMG_6497.JPG
IMG_6497.JPG [ 783.89 KiB | Viewed 25505 times ]
File comment: Everything soldered minus heater wiring
IMG_6496.JPG
IMG_6496.JPG [ 1.48 MiB | Viewed 25505 times ]
File comment: reverse side of board showing correct jumper layout
IMG_6492.JPG
IMG_6492.JPG [ 1.6 MiB | Viewed 25505 times ]
Top
 Profile  
 
 Post subject: Re: My Trifly build!
PostPosted: Tue Apr 05, 2016 7:34 pm 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
Congratulations on your build. I had posted your 412 picture on another post.
Higher gain is possible with different bypass caps etc. The usual approach as it's traditional circuit and easy to play with. To try out a cap, you can just tack it on in parallel with the existing one to see how it sounds. The extra cap vaulue will be added to the existing one.
A 12AX7 has the most gain of the bunch, but some have more than others. I find some Chinese ones have more mu than others.
But turn it to max and work backwards! We found the volume doesn't change that much at max versus half way, just more dirt.
Enjoy!

Attachment:
image.jpeg
image.jpeg [ 2.57 MiB | Viewed 25500 times ]

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject: Re: My Trifly build!
PostPosted: Wed Apr 06, 2016 12:35 am 
Offline
Expert
Expert
User avatar

Joined: Sun Feb 17, 2008 4:47 pm
Posts: 960
Location: Toronto, Canada.
That's an impressive little amp

I'm more impressed it still needs an attenuator though!

_________________
http://pdfelectronics.com


Top
 Profile  
 
 Post subject: Re: My Trifly build!
PostPosted: Wed Apr 06, 2016 12:34 pm 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
kurtlives wrote:
I'm more impressed it still needs an attenuator though!


Ha, I took a Master Volume out of the design because everyone said it didn't need it!!

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject: Re: My Trifly build!
PostPosted: Tue Aug 23, 2016 11:53 am 
Offline
Experienced
Experienced
User avatar

Joined: Wed Mar 31, 2010 5:47 pm
Posts: 341
Location: Oceanside, CA
I'm guessing the OP probably wouldn't need an attenuator as much, or at all, if he wasn't using a 4x12 cab.

_________________
Go Buckeyes!


Top
 Profile  
 
 Post subject: Re: My Trifly build!
PostPosted: Tue Aug 23, 2016 12:35 pm 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
RMosack wrote:
I'm guessing the OP probably wouldn't need an attenuator as much, or at all, if he wasn't using a 4x12 cab.


Yeah a good 10" does an awesome job! We used 10" Jensen Blackbird, Tone Tubby Low Watt and I think I'm probably going to try the Warehouse Guitar Speaker WGS 10" G10C.

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject: Re: My Trifly build!
PostPosted: Fri Dec 21, 2018 4:35 am 
Offline

Joined: Mon Aug 28, 2017 7:50 am
Posts: 6
RMosack wrote:
I'm guessing the OP probably wouldn't need an attenuator as much, or at all, if he wasn't using a 4x12 cab. see full extenze reviews here


all of these are not making those funny clips :snooze: :snooze:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group