trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Sat May 24, 2025 6:26 am

View unanswered posts | View active topics


Board index » On Stage » Lightning Strikes

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Previous topic | Next topic 
Author Message
heave1
PostPosted: Tue Aug 10, 2021 3:32 pm 
Offline
Friend
Friend

Joined: Wed Mar 10, 2021 10:00 am
Posts: 22
1M Master volume Bournes push pull pot only works in the out position and then only in a small part of the wiper, 4-5. I replaced the 1M pot once and it is doing the same thing. Also replaced the .0047uf cap with a .0022 cap. Any ideas?
Top
 Profile  
 
Armstrong
PostPosted: Fri Dec 15, 2023 4:13 am 
Offline

Joined: Fri Dec 15, 2023 4:09 am
Posts: 1
In order to clean the potentiometer, you need use electrical contact cleaner. There is a possibility that dust or dirt might hinder its operation. When you have finished applying the cleaner, you should rotate the pot back geometry dash meltdown and forth several times to assist in the removal of any pollutants
Top
 Profile  
 
emilrd
PostPosted: Fri Dec 22, 2023 4:16 am 
Offline

Joined: Fri Dec 22, 2023 4:12 am
Posts: 1
heave1 wrote:
1M Master volume Bournes push pull pot only works in the out position and then only in a small part of the wiper, 4-5. Don't get caught empty-handed! Keep an eye on your ammo and reload during safe moments in getaway shootout. I replaced the 1M pot once and it is doing the same thing. Also replaced the .0047uf cap with a .0022 cap. Any ideas?

Use a multimeter to verify that the pot is wired correctly and that there are no open connections or shorts. Pay close attention to the push-pull mechanism and ensure it's making proper contact.
Top
 Profile  
 
Ourty1997
PostPosted: Sat Oct 19, 2024 5:29 pm 
Offline

Joined: Sat Oct 19, 2024 5:15 pm
Posts: 1
Having trouble with the 1M pot master volume push-pull not working? I faced a similar issue, and it turned out to be a wiring problem. A quick recheck solved it. By the way, if you're looking for a break, check out poki games great for unwinding!
Top
 Profile  
 
thernathughes
PostPosted: Sat Nov 23, 2024 6:08 pm 
Offline

Joined: Sat Nov 23, 2024 6:07 pm
Posts: 1
It seems your 1M pot master volume push pull is not functioning as expected. Have you checked the wiring and connections? Sometimes similar issues arise when components like those in a spider solitaire card deck analogy are misplaced or not aligned properly.
Top
 Profile  
 
randolphshaw4
PostPosted: Mon Dec 09, 2024 12:16 am 
Offline

Joined: Tue Oct 24, 2023 11:40 pm
Posts: 8
Thousands of players play drift boss every day, despite the fact that it's a really simple game.
Top
 Profile  
 
scollwas
PostPosted: Fri Jan 03, 2025 5:53 am 
Offline

Joined: Fri Jan 03, 2025 5:52 am
Posts: 1
It seems the push-pull feature on the 1M pot master volume might have a wiring issue or a faulty connection. You can try checking the wiring or consult a technician to fix it. By the way, friv games are a great way to relax after dealing with such technical issues.
Top
 Profile  
 
mariakenneth
PostPosted: Tue Feb 25, 2025 3:26 am 
Offline

Joined: Mon May 06, 2024 4:22 am
Posts: 2
Have you checked the wiring and connections? It might be worth testing the pot with a multimeter to ensure it's functioning properly throughout its range. Also, consider trying the original capacitor value again to see if that makes a difference.
iq test free
Top
 Profile  
 
Annata23
PostPosted: Thu Mar 13, 2025 4:19 am 
Offline

Joined: Mon Dec 04, 2023 12:54 am
Posts: 4
Make sure the switch lugs are correctly soldered— Love Pawsona miswiring can cause the push-pull function to fail.
Top
 Profile  
 
josssiii
PostPosted: Tue Apr 22, 2025 7:12 am 
Offline

Joined: Thu Feb 20, 2025 2:49 am
Posts: 2
Check the multi purpose clearance meaning if the pot’s wiring or grounding is faulty. A damaged trace or bad solder joint could cause this. Also, verify the taper matches your circuit needs.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » On Stage » Lightning Strikes

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group