CoffeeTones wrote:
The VRM is new to me.......My usual suppliers have 5.1 ohm, 2 &3 watt metal oxide resistors. So 2% or so off the 5R value. Will that be fine for this application or is it best to use 5 measured ohms exactly along with the other 100k resistors?
5.1 ohms is perfectly fine. It sets the max dissipation of the circuit.
CoffeeTones wrote:
Does the 1M pot have to be other than the normal Alpha or equivalent?
1M Linear or Audio - 1/4W minimum
CoffeeTones wrote:
Also, can this VRM be applied to other cathode biased amps without modifying VRM values / components / wiring?
Yes, up to about 50 watts. Cathode biased only though.
Thanks[/quote]