trinityamps.com

Thanks for the info

I have JJ's in there now, waiting for a pair of NOS Sylvania's

Once I get them in there I'll recheck.

You dont need to use 2W in there either. 1W is plenty. To get the higher ma, you could try maybe 200K 1W.

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps

Set the dissapation at about 70% with a set of JJ 6v6's, all pre's and PI are Ei 12ax7's. Used the bias switch set for KT66's to get a 21mA bias on the JJ's.

This sucker is LOUD No squeel even with the overdrive maxed, but hard to keep feedback in check

With the overdrive on, getting a fuzz tone, probably because of the 12ax7 in the PI for now, preamp is getting hit pretty hard with the signal from the LP's humbuckers.

Cleans up nice when I roll back the volume on the LP.

Noticeable difference between the three inputs- Nice

Waiting for the NOS tubes to see what she'll do then

Congratulations!!!

BTW your tube selector switch is actually in the 6V6 position. You would get a lot less current with the switch in the KT66 position.

_________________
Great tones come in small glass jars!

Thanks for the update and clarification

I'll post an update when the NOS tubes go in