sazafraz wrote:
whats your line voltage if its higher that 117v you will have higher results
When you check the heater voltage on the other tubes are they 6.3 v as well
And when your taking b + readings with no tubes in your gonna get a higher reading as there is no load
I think in the startup notes the voltages are higher with no tubes in
Hi sazafraz,
Thanks for the response. Stephen replied to my email shortly after I posted (how is THAT for service!?!?! And on a Sunday no less!), and we're working through the issues. Turns out those voltages I posted are ok, as there was no load, as you eluded to saz. But, I've got other problems... the cathode voltage on the 6V6s is way too high... 40VDC when it should be around 22VDC.