trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Fri Nov 22, 2024 9:39 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Using a KT66
PostPosted: Wed Nov 28, 2018 10:35 am 
Offline

Joined: Tue Nov 27, 2018 10:48 pm
Posts: 1
Can a KT66 power tube be used in the Triton if an appropriate cathode bias resistor is used, as is suggested in the documentation for the Tramp? Also, would the output transformer primaries have to be switched to 2.5 K or left at 5K, again per the Tramp documentation? Any other things to consider, say heater current requirements, if I wanted to run a KT66 in a Triton? Thanks much.


Top
 Profile  
 
 Post subject: Re: Using a KT66
PostPosted: Fri Nov 30, 2018 8:50 pm 
Offline
Experienced
Experienced
User avatar

Joined: Wed Aug 26, 2009 11:27 pm
Posts: 273
Location: Ontario
Looking at the schematic it says the power trans has 1.5 amps of heater current avail

Coco will have to confirm

Kt66 draws 1.3 amps

6l6 draws . 9 amps. 6v6 draws less
6sj7 draws .3 amps

6l6 +6sj7 =1.2amps

kt66+6sj7=1.6amps

the only kt66 that I know of that draws .9amps is the new production tung sol


Top
 Profile  
 
 Post subject: Re: Using a KT66
PostPosted: Fri Dec 14, 2018 12:48 pm 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
Transformer specs say it can provide 100mA at High voltage and 2.25 A heater current.

I expect it will power the heaters, the bias current should b fine too. Use the 4K bias tap.

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject: Re: Using a KT66
PostPosted: Thu Oct 24, 2024 12:08 am 
Offline

Joined: Wed Oct 23, 2024 3:11 am
Posts: 1
coco wrote:
Transformer specs say it can provide 100mA at High voltage and 2.25 A heater current.
fnaf 1
I expect it will power the heaters, the bias current should b fine too. Use the 4K bias tap.

I found it to be quite good and the power is quite good.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group