Page 34 - Triwatt Custom Lead Amp Builder's Guide
P. 34
Brown - 4K Orange – 16 ohm
Green – 8 ohm
8K impedance connection Red - CT Yellow – 4 ohm
Blue - 4K Black - 0
Trinity Amps HTS-9641-1 50EZ Output Transformer
Wiring the Progressive Power Switch
This amp has a special power switch that combines both Power and Standby into one convenient
switch. In one extreme position, the amp is Off, in the middle position it is on Standby and in the
third position it is in the On position. This switch is not wired up like other power switches so
follow the diagrams below and layout closely.
Make sure the switch is in the desired on position when it is on. Align according to the front
panel. Connect the twisted leads to the AC side of the switch. Now connect the lead from the
rectifier center position to the switch DC side, and then return to the board 2.4K resistor for the
DC side.
Off
Standby To Power Tran From Rectifier
On From Mains To B+ Amp
Fuse
TrinityAmps TRIWATT Builders Guide Ver. 2.31.docx- 34 -
