Page 41 - Triwatt Custom Lead Amp Builder's Guide
P. 41
8 Output Transformer - Output Jacks
Refer to the Output Transformer schematic. Twist the Blue & Brown output leads from the
transformer to the output tubes. Leave enough transformer lead length to reverse the leads from
one 6V6/KT66 to the other if necessary to eliminate amplifier squealing.
Start by soldering the Brown output lead to V4 and the Blue to V5.
Brown - 4K Orange – 16 ohm
Green – 8 ohm
8K impedance connection Red - CT Yellow – 4 ohm
Blue - 4K Black - 0
Trinity Amps TRIWATT Partridge Output Transformer
Connecting the Impedance Selector
Referring to the Output Transformer schematic above, wire up the Impedance Selector to the
transformers and output jacks paying particular attention to the leads for the correct impedance.
Refer to the diagram below for the connections.
TrinityAmps TRIWATT Builders Guide Ver. 2.31.docx- 41 -
